| 60 Hz, 1800 RPM, kW |
80 kW |
|
| 50 Hz, 1500 RPM, kW |
|
80 kW |
| Voltage Regulation |
1% |
1% |
| Volts/Amps |
208/139 |
380/76 |
| Frequency Droop Control |
Isochronous 0% |
|
| Phase and Power Factor |
Three Phase 0.8 Power Factor std. |
|
|
Opt.: Single Phase – 1.0 Power Factor |
|
| Generator Full Load Temp. Rise |
90°C Temperature Rise at 50°C Ambient |
|
Lugger Diesel Engine Data
|
|
|
| Inline Cylinders/Aspiration/Operating Cycle |
I-4/Turbo & Aftercooled/4 |
|
| Displacement – in³ (ltr) |
276 (4.5) |
276 (4.5) |
| Bore/Stroke – in (mm) |
4.19/5 (106/127) |
4.19/5 (106/127) |
Cooling System – Heat Exchange Standard, Keel-Cooling Optional
|
|
|
| Heat Rejection to Jacket Water – rpm BTU min |
5863 |
5863 |
| Freshwater Pump Capacity – rpm/gpm (lpm) |
40.9 (155) |
36 (136) |
| Heat Exchanger Approx. Cooling Capacity – gal (ltr) |
4.4 (17) |
4.4 (17) |
| Keel-Cool Approx. Cooling Capacity – gal (ltr) |
5.2 (20 |
5.2 (20 |
| Seawater Pump Capacity – rpm/gpm (lpm) |
52 (197) |
41 (155) |
| Max. Seawater Pump Suction Head Lift – ft (m) |
10 (3) |
10 (3) |
| Seawater Pump Inlet Hose ID – in (mm) |
2 (51) |
2 (51) |
| Min. Seawater Inlet/Discharge Thru-Hull – in (mm) |
2 (51) |
2 (51) |
DC Electrical
|
|
|
| DC Starting Voltage – standard (optional) |
12 (24) |
12 (24) |
| Min. Battery Capacity – amp hr 12V (24V) |
625 (500) |
625 (500) |
| Min. Battery Size CCA – 12V (24V) |
1100 (750) |
110 (750) |
| Starter Rolling Amps @ 0°C – 12V DC (24V DC) |
920 (600) |
920 (600) |
| 12 Volt Battery Cable Size Up to 10ft (3m) |
2/0 |
2/0 |
Air
|
|
|
| Air Consumption – rpm/cfm/ (m³/m) |
301 (8.5) |
209 (5.9) |
| Approximate Heat Radiated to Air – rpm/BTU/min |
689 |
689 |
| Generator Cooling Air Flow 1&3Ø – rpm cfm |
700 |
575 |
| Exhaust Gas Volume – rpm/cfm (m³/m) |
685 (19.4) |
519 (14.7) |
| Exhaust Gas Temp. – rpm/F° (C°) |
813 (434) |
910 (488) |
| Max. Exhaust Back Pressure – in H²O (mm H²O) |
30 (762) |
30 (762) |
| Wet Exhaust Elbow OD – in (mm) |
5 (127) |
5 (127) |
| Dry Exhaust Elbow – in (mm) |
4 (102) |
4 (102) |
Fuel
|
|
|
| Fuel Injection Pump type and Control |
Electronic (HPCR) |
Electronic (HPCR) |
| Min. Suction – in (mm) |
3/8 (10) |
3/8 (10) |
| Min. Return Line – in (mm) |
1/4 (6.4) |
1/4 (6.4) |
| Max. Fuel Transfer Pump Suction Lift – in (m) |
80 (2) |
80 (2) |
| Max. Fuel Flow to Transfer Pump RPM – gph |
19.5 |
18.8 |
| Specific Fuel Consumption Max. Load RPM – lbs. hp. hr |
0.394 |
0.381 |
| Approx. Fuel Rate at RPM Fuel Load – gph (lph) |
6.7 (25.4) |
6.4 (24.1) |
| Fuel Supply and Return – Max Pressure PSI. Height – ft (m) |
2.9 |
2.9 |
| Fuel Supply and Return Height – in (m) |
80 (2) |
80 (2) |
Max Engine Operating Angle
|
|
|
| Continuous (with Separate Expansion Tank) |
30° |
30° |
| Intermittent (2 Minutes) |
45° |
45° |
Dimensions and Weight
|
– Low Profile; Do not use for installation. Contact Factory for installation drawings and info. |
|
| Length – in (mm) |
76.75 (1949) |
76.75 (1949) |
| Width – in (mm) |
38.00 (965) |
38.00 (965) |
| Height – in (mm) |
39.31 (998) |
39.31 (998) |
| Weight – lbs (kg) |
2749 (1247) |
2749 (1247) |
Dimensions and Weight
|
– Optional Enclosure; Do not use for installation. Contact Factory for installation drawings and info. |
|
| Length – in (mm) |
77.53 (1969) |
77.53 (1969) |
| Width – in (mm) |
38.00 (965) |
38.00 (965) |
| Height – in (mm) |
40.90 (1039) |
40.90 (1039) |
|
3170 (1438) |
3170 (1438) |
Reviews
There are no reviews yet.