Description
Features & Benefits
| Engine Block |
|
| Fuel Systems |
|
| Lubrication System |
|
| Air System |
|
| Cooling system |
|
| ESP and DC Electrical System |
|
| AC Generator |
|
| Special Equipment |
|
Product Specifications
| 116kW | 116kW | |
|---|---|---|
AC Output |
60 Hz, 1800 RPM | 50 Hz, 1500 RPM |
| Voltage regulation | +/- 0.5% | |
| Frequency droop control | Isochronous, 0.5 Hz, 1.7 Hz, 3.0 Hz | |
| Phase and power factor | Three phase 0.8 power factor std. | |
| Generator full load temperature rise | 90°C temperature rise at 50°C ambient | |
Lugger Diesel Engine Data |
||
| Inline cylinders/aspiration/operating cycle | I-6 / Turbo & Aftercooled / 4 | |
| Displacement – cid (liter) | 414 (6.8) | |
| Bore/stroke – inches (mm) | 4.19/5 (106/127) | |
| Fuel injection pump type and control | Electronic (HPCR) | |
Cooling System (Heat exchanger cooled) |
60 Hz |
50 Hz |
| Heat rejection to jacket water – BTU min | 9,580 | 7,980 |
| Freshwater pump capacity – gpm (lpm) | 52.0 (197) | 42.9 (162) |
| Approximate coolant capacity – gal (ltr) | 9.0 (34) | 9.0 (34) |
| Seawater Pump Flow – gpm(lpm) | 51 (192) | 43 (162) |
| Max seawater pump suction head lift – ft (m) | 9.8 (3) | 9.8 (3) |
| Sea water pump inlet hose ID – in (mm) | 2.0 (51) | 2.0 (51) |
| Min. seawater inlet/discharge thru-hull – in (mm) | 2.0 (51) | 2.0 (51) |
DC Electrical (12V standard, 24V optional) |
||
| DC starting voltage – standard (optional) | 12 (24) | |
| Min battery capacity – 12V CCA (24V CCA) | 925 (625) | |
| Starter rolling amps @ 0°C – 12VDC (24VDC) | 920 (600) | |
| 12 Volt battery cable size up to 10 ft (3m) | 000 | |
Air |
60 Hz |
50 Hz |
| Air consumption – cfm (m3 /m) |
510 (14.4) | 325 (9.2) |
| Approx heat radiated to air – BTU/min (kW) | 1,085 (19) | 966 (17) |
| Generator cooling air ow 1 & 3 Ø – cfm (m3 m3/m) |
1,100(31) | 915 (26) |
| Exhaust gas volume – cfm (m3 /m) |
1,036 (29.3) | 747 (21.2) |
| Exhaust gas temp – F° (C°) | 694 (368) | 822 (439) |
| Max. exhaust back pressure – inch H2 O (mm H2 O) |
30 (762) | 30 (762) |
| Wet exhaust elbow OD- in (mm) | 5 (127) | 5 (127) |
| Dry exhaust elbow in (mm) | 4 (102) | 4 (102) |
Fuel |
||
| Fuel injection pump type and control | High Pressure Common Rail | |
| Min suction line size – in (mm) | 0.31 (8) | |
| Min return line size – in (mm) | 0.31 (8) | |
| Max fuel transfer pump suction lift – ft (m) | 7.9 (2.4) | |
| Max fuel ow to transfer pump – gph 4 | 42.8 | |
| Specific fuel consumption full load 60 hz – lbs/hp-hr | 0.411 | |
| Specific fuel consumption full load 50 hz – lbs/hp-hr | 0.365 | |
| Approx. fuel rate** at 60 Hz full load – gph (lph | 10.0 (38.0) | |
| Approx. fuel rate** at 50 Hz full load – gph (lph) | 8.9 (33.8) | |
Max Engine Operating Angle |
||
| Continuous (with separate expansion tank) | 25 | |
| Intermittent (2 minutes) | 35 | |
Dimensions and Weight |
Open Genset |
w/ Enclosure |
| Length – inches (mm) | 84.4 (2144) | 90.0 (2286) |
| Width – inches (mm) | 38.3 (973) | 42.0 (1067) |
| Height – inches (mm) | 39.84 (1012) | 42.0 (1067) |
| Weight – pounds (kilograms) | 3405 (1544) | 4122 (1869) |
Dimensions provided for information only. Do not use for installation. Contact factory for installation drawings and info.
Reviews
There are no reviews yet.